KIA Turn 15 CNC Lathe - used
$10.00 USD (1 Bids)
Closes:
3d6h(Jul 13, 2026 02:37 PM UTC)
$2.00 USD
Bid IncrementSales/Lot Type:
Online Auction
Location:
Salisbury, Maryland, USASubject to an auto-extension of the auction end time.
Possible Bad Bid
The Minimum Bid is USD 12.00.
Is this correct?
If this is correct, to continue select "Accept Bid."
If this is incorrect or you want to submit as a Max Auto Bid, select "Reject Bid."
Is this correct?
If this is correct, to continue select "Accept Bid."
If this is incorrect or you want to submit as a Max Auto Bid, select "Reject Bid."
Description
| Condition | Used/See Description |
| Lot Number | 5889-1666 |
KIA Turn 15 CNC Lathe
This machine was used in a Career Technical Education Center for both High School Students and Community College students. It was purchased in 1997 and used by 1 teacher for over 25 years. There are not any known issues with this machine. It has not been used for at least 10 years due to changes in curriculum. All tooling shown in pictures comes with machine. Caution the machine is 8900lbs. There are forklift holes in the bottom but a 10,000lb forklift must be used. It is easily accessible. Currently there is no coolant in the machine. The machine has no known issues. Hydraulic 16C collet Chuck is currently installed in machine. Bar puller is also installed.
Power: 3 phase 220V
Buyer's Responsibility:
Machine must be removed by buyer using either rigging company or renting a forklift capable of moving the machine.
Technical Specifications (1996 Model)
Based on the manufacturer details for the KIA TURN 15 (Serial No. 81004-10514) produced by KIA HEAVY INDUSTRIES CORP. in Changwon, Korea, the following specifications represent the standard configuration for this model year.
Machine Capacity
Component Specification
Swing Over Bed 17.7" (450 mm)
Max. Turning Diameter 10.6" (270 mm)
Max. Turning Length 15.7" (400 mm)
Distance Between Centers 21.6" (550 mm)
Spindle System
Component Specification
Spindle Speed Range 45 – 4,500 RPM
Spindle Nose A2-6
Spindle Bore 2.4" (61 mm)
Drawtube Internal Diameter 2.04" (52 mm)
Main Motor Power 10 HP / 15 HP (Continuous / 30 Min)
Turret and Axis Travel
Component Specification
Number of Tool Stations 12 positions
X-Axis Travel 6.3" (160 mm)
Z-Axis Travel 16.9" (430 mm)
Rapid Traverse Rate (X-Axis) 787 IPM (20 m/min)
Rapid Traverse Rate (Z-Axis) 945 IPM (24 m/min)
General Information
Component Specification
Control System Yasnac Control (Standard for 1996)
Tailstock Taper MT #4
Machine Weight Approx. 4000 kg
Manufacturer Location Changwon, Kyungnam, Korea
The serial plate indicates this specific unit is part of the production run managed by Kia Heavy Industries prior to their integration into the Hyundai-Kia Machine Tool division.
This machine was used in a Career Technical Education Center for both High School Students and Community College students. It was purchased in 1997 and used by 1 teacher for over 25 years. There are not any known issues with this machine. It has not been used for at least 10 years due to changes in curriculum. All tooling shown in pictures comes with machine. Caution the machine is 8900lbs. There are forklift holes in the bottom but a 10,000lb forklift must be used. It is easily accessible. Currently there is no coolant in the machine. The machine has no known issues. Hydraulic 16C collet Chuck is currently installed in machine. Bar puller is also installed.
Power: 3 phase 220V
Buyer's Responsibility:
Machine must be removed by buyer using either rigging company or renting a forklift capable of moving the machine.
Technical Specifications (1996 Model)
Based on the manufacturer details for the KIA TURN 15 (Serial No. 81004-10514) produced by KIA HEAVY INDUSTRIES CORP. in Changwon, Korea, the following specifications represent the standard configuration for this model year.
Machine Capacity
Component Specification
Swing Over Bed 17.7" (450 mm)
Max. Turning Diameter 10.6" (270 mm)
Max. Turning Length 15.7" (400 mm)
Distance Between Centers 21.6" (550 mm)
Spindle System
Component Specification
Spindle Speed Range 45 – 4,500 RPM
Spindle Nose A2-6
Spindle Bore 2.4" (61 mm)
Drawtube Internal Diameter 2.04" (52 mm)
Main Motor Power 10 HP / 15 HP (Continuous / 30 Min)
Turret and Axis Travel
Component Specification
Number of Tool Stations 12 positions
X-Axis Travel 6.3" (160 mm)
Z-Axis Travel 16.9" (430 mm)
Rapid Traverse Rate (X-Axis) 787 IPM (20 m/min)
Rapid Traverse Rate (Z-Axis) 945 IPM (24 m/min)
General Information
Component Specification
Control System Yasnac Control (Standard for 1996)
Tailstock Taper MT #4
Machine Weight Approx. 4000 kg
Manufacturer Location Changwon, Kyungnam, Korea
The serial plate indicates this specific unit is part of the production run managed by Kia Heavy Industries prior to their integration into the Hyundai-Kia Machine Tool division.
Q & A
Have a question or looking to schedule an appointment?
Seller Information
Seller:
Asset Contact:
Cyndi Wilmer
Email:
Phone:
Account Type:
Government
Inspection
Most items offered for sale are used and may contain defects not immediately detectable. Bidders may inspect the property prior to bidding. Inspection is by appointment only. Please see the contact above to schedule an inspection.
Payment
PAYMENT MUST BE MADE ONLINE -- To make online payment, log into your Liquidity Services account and select 'My Bids'. Please follow the instructions there.
Payment in full is due not later than five (5) business days from the time and date of the Buyer's Certificate. Payment must be made electronically via the payment methods listed below.
Payment in full is due not later than five (5) business days from the time and date of the Buyer's Certificate. Payment must be made electronically via the payment methods listed below.
TAX EXEMPTION: Where taxes are applicable (see the Buyer's Certificate), Tax Exempt documents must be provided to this seller within 24 hours of the auctions close and before payment is made. Please see the contact below for any questions.
Removal
Property may be removed by appointment only and appointments must be made at least 24 hours in advance. All items must be removed within ten (10) business days from the time and date of issuance of the Buyer's Certificate.
The Buyer will make all arrangements and perform all work necessary, including packing, loading and transportation of the property. No Assistance will be provided. A daily storage fee of $10.00 may be charged for any item not removed within the 10 business days allowed and stated on the Buyer's Certificate.
The Buyer will make all arrangements and perform all work necessary, including packing, loading and transportation of the property. No Assistance will be provided. A daily storage fee of $10.00 may be charged for any item not removed within the 10 business days allowed and stated on the Buyer's Certificate.
Removal and Transportation Options
Discover unbeatable nationwide transporters from our preferred shippers. Explore our curated list of qualified third-party shipping vendors to revolutionize your shipping experience.
Special Instructions
NOTICE: If you are the winning bidder and default by failing to adhere to this sellers terms and conditions your account with Liquidity Services WILL BE LOCKED.
Guaranty Waiver. All property is offered for sale 'AS IS, WHERE IS.' Wicomico County Board of Education, MD makes no warranty, guaranty or representation of any kind, expressed or implied, as to the merchantability or fitness for any purpose of the property offered for sale. Please note that upon removal of the property, all sales are final.
Description Warranty. Seller warrants to the Buyer that the property offered for sale will conform to its description. Any claim for misdescription must be made prior to removal of the property. If Seller confirms that the property does not conform to the description, Seller will keep the property and refund any money paid. The liability of the seller shall not exceed the actual purchase price of the property.
Guaranty Waiver. All property is offered for sale 'AS IS, WHERE IS.' Wicomico County Board of Education, MD makes no warranty, guaranty or representation of any kind, expressed or implied, as to the merchantability or fitness for any purpose of the property offered for sale. Please note that upon removal of the property, all sales are final.
Description Warranty. Seller warrants to the Buyer that the property offered for sale will conform to its description. Any claim for misdescription must be made prior to removal of the property. If Seller confirms that the property does not conform to the description, Seller will keep the property and refund any money paid. The liability of the seller shall not exceed the actual purchase price of the property.
Bid History
Bid History refreshes automatically
Asset ID 1666 / Bids 1
be*****
July 06, 2026 08:24 PM UTC
USD 10.00High Bidder
User ID
Bid Date & Time
Bid Amount
Additional Information
First time bidding? Please review our Terms and Conditions.
For further assistance please review our Frequently Asked Questions.