Millermatic® 350P MIG Power Source, Wire Feeder and Gun Package

This welder appears to be in excellant condition, low hours, used in a technical institute to teach welding..
(No guarantees, sold "as is, where is")

can be tested at my facility... text for appointment
(gas bottle and gagues not included..)

can be run on 3 different electrical sources:
460 v 3 ph
230 v 3 ph
220v 1 ph

currently set up for 230 v 3 ph
but easily changed


has the ability to weld: mild steel, alum., and stainless steel

currently set up for .045 steel

has: Bernard® BTB MIG Gun
15 ft. (4.6 m) .045" tip/knozzle, for mild steel

two set of feed rollers:

V-Knurled Drive Roll Kit
V-Grooved Drive Roll Kit
each set has dual sizes
both .035/.045


(2) FACTORY OEM manuals
Owners (60 pages)
Technical (140 Pages)

gas bottle and gagues not included..

specs:

Processes
MIG (GMAW)
Pulsed MIG (GMAW-P)
Flux-cored (FCAW)
Rated Output
300 A at 32 VDC, 60% duty cycle,
1- or 3-phase input power, 60 Hz
Industrial Applications
Fabrication
Maintenance and repair
Farm
Manufacturing
Industrial
Issued Oct. 2020 • Index No. DC/12.51
Special features
• Run-in adjustment for MIG,
push-pull and spool guns.
• Built-in two-minute spot timer.
• Pre-flow and post-flow adjustment.
• View actual welding amperage/
voltage during welding, and five
seconds after arc has shutoff.
• SharpArc™ controls welding
arc cone width in pulsed MIG
welding mode.
• Inductance control customizes
weld out put characteristics in MIG
welding mode.
Amperage Range 25 – 400 A
Wire Feed Speed
50 – 700 ipm (1.3 – 17.8 m/min.) with MIG gun
50 – 800 ipm (1.3 – 20 m/min.) with spool gun/push-pull gun
Net Weight 181 lb. (82 kg)

see the specs. here: https://www.millerwelds.com/-/media/inriver/dc1251-millermatic-350p--english.pdf

******** ****** All Items are represented to the best of our ability.
It is the buyer's responsibility to read all provided information, and view all photos and videos, and possibly make on-site inspections if desired ***


** Inspection is by appointment only. 10AM-6PM- Mon.-Sat. Call or Text James at 1-919-896-5743.

Note: Texting gets a faster response..usually within an hour or less**

**Asset Must Be Removed Within 15 Business Days From Auction Close,

Items Not Removed In This Time frame Are Subject To Relocation And Storage Charges, or Considered Abandoned**

***Lot Removal: Location requires an appointment 48 hours in advance of pickup, unscheduled pickups will be turned away.
A loadout ticket, and signature is required at the time of pickup***

Note: Seller Agrees to side Load Lot on to a flat-bed truck/trailer for $50.00 cash , prepaid directly to the seller , before loading