Vector FL52 Product Specifications

Operating Specifications

Imaging Technology: ThinDrum
Laser Technology: Presstek SureFire FL: Class 1 laser product
Media: Freedom Pro thermal plates

Media Supply:
Standard: Single plate, semi-automated feed
Autoloader: Holds 20 pre-punched plates, stacked with plate separators on the input tray

Plate Lengths: Selectable over the range: 14.375" to 19.875" (365 mm to 505 mm)

Plate Widths: 11" to 18" (280 mm to 457 mm) and 20" to 20.66" (508 mm to 525 mm)

Maximum Image Area: 20.66" W x 18.58" L (530 mm W x 472 mm L)

Plate Thickness: .006" and .008" (.15 mm and .20 mm)

Resolution: 2400 dpi

Screening: Up to 175 line screen

Speed: Up to 16 plates an hour

Plate Washer: Integrated water wash with scrub rollers. Optional auto-loader includes stacker, air jet dryer, and flipper for stacking finished plates

Register System: Dual internal register pin system

Operating Environment:
Daylight-safe; 60–75°F (15.5–23.8°C);
40–80% relative humidity (non-condensing)
Autoloader requires compressed air 5 CFM at 90 psi

Physical Specifications

Electrical Requirements:
200–240 VAC, 50/60 Hz, 20 amp, single phase;
NEMA L6-20R receptacle

Weight: 1,000 lbs (454 kgs)

Dimensions (L×W×H): 58" × 29" × 52" (147 cm × 74 cm × 132 cm)

Workflow

RIP/Workflow: Momentum RIP and workflow options available including preflighting, trapping, imposition, and proofing

Freedom Pro Plate Specifications

Plate Type: Chemistry-free, thermal positive writing

Plate Substrate: Aluminum

Printing Mechanism: Wet offset

Resolution: 2%–98% @ 175 LPI

Length of Run: Up to 25,000 impressions

Light Sensitivity: 100% daylight safe; no safelight required

Plate Thickness: .006" and .008" (.15 mm and .20 mm)

Plate Size: Standard 2-page formats, 52 cm and below

Processing: Simple rinsing with only water; no baking or gumming required