BendPak XPR-18CL-192 Heavy-Duty Extra Tall Two Post Lift

Lightly used Bendpak 18,000lb extra height 2-post lift

Model# XPR-18CL-192
serial# 18695-009-012
Installed October 2019, lightly used for Fire Department Fleet Maintenance.

-With proper waivers signed, help to dismantle and load may be available.
-contact information for 3rd party to dismantle @ buyers expense available.
******-Current MSRP is $31,905.56 ************************************
******-Current retail selling price is $16k-$18k**************************
******-Don't let this Almost new condition lift get away from you.*******

BendPak XPR-18CL-192 Heavy-Duty Extra Tall Two Post Lift
18,000 lbs. Capacity Clearfloor Standard Arms
This is the same great truck lift as the popular XPR-18C (standard height model), but with the 2 foot extensions to add height to the columns. This is to provide for added clearance when needed for those really tall trucks that may require extra column height so you can raise the truck high enough to stand up underneath it.
The BendPak XPR-18CL-192 is ALI and ETL Certified.

Features & Specs
18,000-lb. lifting capacity
CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
Padded overhead safety shutoff bar
Taller column height provides greater overhead clearance
Single-piece columns / model XPR-18CL
Bolt-on column extensions / model XPR-18CL-192
Single-point safety release
Drop-end arms provide a lower pad height
Dual hydraulic direct-drive cylinders
Oversized 53" tall carriage for superior strength and durability
Electric / hydraulic power system
Oversized A36 steel base plate
Self-lubricating dura-glide UHMW polyethylene bearing system
Safety locks in each column spaced every 3"
Two-stage telescoping front and rear arms
Automatic arm restraints
Heavy-duty 1/2" aircraft-quality equalizer cables
6” diameter machined steel cable sheaves reduces cable fatigue
8-piece truck and van adapter set STANDARD
Frame cradle pads STANDARD
Round rubber contact pads STANDARD
ALI certified

MODEL: XPR-18CL-192
Lifting Capacity* 18,000 lbs. / 8,165 kg.
*Max Capacity / Front Axle 9,000 lbs. / 4,082 kg.
*Max Capacity / Rear Axle 9,000 lbs. / 4,082 kg.
A - Height Overall: 192.7" / 4,895 mm.*
B - Width Overall (Outside of Base Plate): 155" / 3,937 mm.
C - Width (Outside of Columns): 144" / 3,658 mm.
D - Floor To Overhead Switch: 187.7" / 4,768 mm.*
E - Inside Columns: 120" / 3,048 mm.
F - Reach (Front Arm Min.): 39" / 991 mm.
G - Reach (Front Arm Max.): 60" / 1,524 mm.
H - Reach (Rear Arm Min.): 39" / 991 mm.
I - Reach (Rear Arm Max.): 60" / 1,524 mm.
J - Min. Pad Height: 5" / 127 mm.
K - Rise: 69" / 1,753 mm.
L - Max Lift Height (Pad Only): 74" / 1,880 mm.
M - Max Lift Height (6" Adapter): 80" / 2,032 mm.
N - Drive-Thru Clearance: 106" / 2,692 mm.
Motor (**) 220 VAC / 60 Hz. 1Ph.
Time of full Rise: 45 Seconds
Max Load Per Arm: 4,500 lbs. / 2,041 kg.

Selling due to upgrade of Rotary mobile column lifts.