NOTE!! This item is located in Fairbanks Alaska. Read “Removal Instructions” very carefully before placing bid.

NOTE!! See New Pick Up Hours Below.

NOTE!! Please Be Prepared To Load Items Yourself.

Condition: Unknown

This lot consists of one (1) reverse osmosis water treatment system.

The system has been rated as being in unknown condition because it has not been tested by warehouse personnel. In addition, the system has not been inspected for completeness, and the presence or absence of all original components has not been verified. As such, the operational status, functionality, and completeness of the system are unknown and cannot be guaranteed.

The system consists of a central control assembly equipped with multiple controls, gauges, piping, and associated components. Mounted along the rear of the unit are four (4) reverse osmosis pressure vessels. Other pieces are present throughout the assembly.

The readable filter identification label contains the following information:

Filflo Filter

Part Number: 9440-3114
Model: BSSB20-1SD
Maximum Design Operating Pressure: 150 PSI @ 250°F

The system is equipped with one Baldor Industrial Motor. The motor data plate contains the following information:

Manufacturer: Baldor
Catalog Number: VM3613T
Spec: 36A03X100
Horsepower: 5 HP
Voltage: 208-230/460 V
Current: 13.2-12/6 A
Speed: 3450 RPM
Frame: 184TC
Frequency: 60 Hz
Phase: 3
Service Factor: 1.15
Code: K
DES: B
Insulation Class: F
NEMA Nominal Efficiency: 85.5%
Power Factor: 93%
Rating: 40°C Ambient Continuous Duty
Usable at 208 V: 13.2 A
Bearings (DE): 6206
Bearings (ODE): 6205
Enclosure: TEFC

Also installed on the system are two (2) Rosemount instruments. Each instrument contains two identification plates.

Upper Rosemount Plate:

Explosion proof for Class I, Division 1, Groups B, C & D
Dust-ignition proof for Class II, Division 1, Groups E, F & G
Factory sealed
Class III, Division 1 hazardous locations
NEMA 4X
Ambient temperature limits: -58°F to 185°F
Revision: F

Lower Rosemount Plate:

Smart Family HART
Maximum Working Pressure: 300 PSI (20.7 BAR)
Supply Voltage: 10.5-55 VDC
Calibration Range: 0-300 PSI
Model: 3051CG4A22A1JM6B4E5Q8

Mounted along the rear of the unit are four (4) Crane Environmental Products reverse osmosis pressure vessels. The vessel labels contain the following information:

Manufacturer: Crane Environmental Products
Maximum Operating Pressure: 600 PSI (4.1 MPa)
Operating Temperature Range: 20°F to 120°F
For water treatment use only
Not for use with compressed air

The above information has been transcribed from the visible manufacturer labels and data plates and has not been independently verified.

Included Components:

One (1) reverse osmosis water treatment system
Four (4) reverse osmosis pressure vessels
Two (2) filter housings
One (1) Baldor Industrial Motor
Two (2) Rosemount pressure instruments
Attached control panel, gauges, piping, and associated components as photographed

Features:

Industrial reverse osmosis system configuration
Integrated control panel with gauges and controls
Four (4) Crane Environmental Products pressure vessels
Two (2) filter housings
Baldor 5 HP, three-phase motor
Two (2) Rosemount Smart Family HART pressure instruments
Extensive factory identification plates and component labels present

Condition Summary:

Rated unknown condition
Untested by warehouse personnel
Operational status unknown
Completeness has not been inspected or verified
One filter label worn and unreadable
Multiple manufacturer data plates and identification labels present
Identification information obtained from visible markings
Sold as photographed

This reverse osmosis system may be suitable for repair, refurbishment, parts recovery, industrial water treatment applications, research, or other uses as determined by the successful bidder. This piece is untested and uninspected for completeness.