ATTENTION CUSTOMER: THIS ITEM IS CURRENTLY LOCATED IN PALMERTON PENNSYLVANIA. WE CAN QUOTE SHIPPING TO ANYWHERE IN THE CONTINENTAL U.S. AND MEXICO.


We are pleased to offer the following for your review:

USED 1995 EAGLE 1000-15CC ELECTRIC CRUSHING PLANT: SN: 11034
Consisting of:
Receiving Hopper: heavy duty, steel reinforcement of side plates, 7’3” x
16’9” top opening;
Vibrating Grizzly Feeder: 39-1/2” x 16’lg., includes 60” tapered step grizzly of nominal 1-
1/2” openings, 25 HP, 1200 RPM, TEFC, electric motor drive
Horizontal Shaft Impactor: Eagle UltraMax 15 Primary/Secondary, Weight – 27,500 lbs.,
36” x 43” feed opening
Fines Bypass Chute: for diverting material to the under-crusher gathering hopper;
Under-Crusher Gathering Hopper: heavy-duty steel plate complete with full length
rubber flashing and replaceable liners;
Plant Conveyor: 42” wide for transporting crusher discharge material to the 2-deck
screen
Vibrating Screen: 5’ x 14’ 2-deck, inclined, 15 HP, 1800RPM, TEFC, electric motor
drive
Return Conveyor: 18” wide plant mounted for return of oversize material of top deck
back to the crusher, 20° troughing idlers, full length skirtboards, 5 HP, motorized
head pulley, top 1/3 is hydraulic retraction for operation and travel.
Top Cross Conveyor: 18” wide for discharge of top deck material to the return
conveyor with 20° troughing idlers
Bottom Cross Conveyor: 18” wide for discharge of bottom deck material to the either side of
plant
Screen Fines Conveyor: 48” wide for discharge for bottom deck fines to the front of the plant,
20° idlers, under-screen gathering hopper with full length rubber flashings, steel plate
discharge chute for transfer of material to radial stacker, 5 HP, electric motor drive;
Platforms and Railings: structural steel frame with expanded metal floor,
platforms and railings located at the crusher, diesel, and hopper for operation:
Main Trailer Frame: 21” wide flange beam side rails, air-ride tri-axle suspension with
71” track axles, twelve 255/70R 22.5 12-ply tires, air controlled brakes

Electric Power: 200 HP, 1800 RPM, TEFC, electric motor drive.
Magnetic Separator: Dings Model 33CR (or equivalent) continuous belt magnet with
stainless steel discharge belt, magnet stand, chute, 5 HP, 1800 RPM, TEFC, electric motor
drive, and magnet rectifier that converts AC voltage to DC voltage.
Central Control Panel: NEMA 4 type box, plant mounted complete with circuit breaker.

CRUSHER WILL BE SOLD WITH ALL BRAND NEW WEAR PARTS $25,000 VALUE.

PRIMARY IMPACT CRUSHER, EAGLE, TEREX, CEDAR RAPIDS, MCCLOSKEY, METSO, SANDVIK, EPIROC, MINING, MEXICO, LATAM, CRUSHING, AGGREGATE.