NOTE!! This item is located in Fairbanks Alaska. Read “Removal Instructions” very carefully before placing bid.

NOTE!! See New Pick Up Hours Below.

NOTE!! Please Be Prepared To Load Items Yourself.

Condition: Fair

This lot consists of one (1) metal storage drum. The drum has been marked as being in fair condition due to evidence of prior use and cosmetic wear, including scratches consistent with handling and industrial service. Despite these signs of use, the drum appears structurally sound and ready for reuse.

This drum was previously used to store industrial propylene glycol. The contents have been emptied and the drum has been rinsed; however, prospective bidders should be aware that residual traces of propylene glycol may still be present within the container. Bidders should inspect and clean the drum as necessary prior to placing it into service.

The manufacturer of this drum is unknown. Two labels bearing the name "Brenntag" are present on the barrel. One label identifies the contents as industrial propylene glycol, while another reads "Brenntag Deposit Container." Brenntag is a known chemical supplier and distributor and is believed to have supplied the contents previously stored within the drum. No evidence was found confirming Brenntag as the manufacturer of the drum itself.

The drum features two (2) bung openings located on the top surface for filling and dispensing contents. One opening is smaller and utilizes coarse threads, while the second opening is larger and utilizes fine threads. Both bung fittings remain installed at the time of listing.

The exact capacity of this drum is unknown. However, the overall size and design are consistent with common industrial storage drums in the 50- to 55-gallon range. No manufacturer specifications were found to verify the exact volume.

While the exact model of this drum could not be determined, the following marking was observed and may assist prospective bidders in identifying the container:

"1A1/Y1.4/150 USA/M4377/23RL DOT-SP 2123"

Included Components:

One (1) metal storage drum

Installed bung fittings

Features:

Metal drum construction

Two (2) bung openings for filling and dispensing

One coarse-threaded bung opening

One fine-threaded bung opening

Previously used for industrial propylene glycol storage

Rinsed following removal of contents

Identification marking present on drum body

Condition Summary:

Marked as fair condition

Shows scratches and cosmetic wear from prior use

Appears structurally sound

Previously contained industrial propylene glycol

Contents emptied and drum rinsed

Residual glycol may still be present

Manufacturer unknown

Capacity not verified

No leak or pressure testing performed

This drum may be suitable for industrial storage, liquid transfer applications, agricultural use, recycling projects, repurposing, or other applications as determined by the successful bidder. Bidders are encouraged to review all photographs and verify suitability for their intended use prior to bidding.