Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021)
Fazer oferta
Localização:
Zwijndrecht, BELRetirada e envio:
O comprador deve providenciar. Veja os detalhes.
OBSERVADORES: 1 |VISITANTES: 92
Impostos
A adicionar no pagamento
Prêmio do comprador
18%
Termos e condições do vendedor
Evento
Descrição
| Manufacturer | Dürr |
| Model | Ecopure Var 2206 |
| Year of Manufacture | 2021 |
| Condition | Used/See Description |
| Lot Number | 31158-1 |
| Inventory ID | Thermal Oxidizer |
For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride
Emissions limits
SO2 ≤ 100 mg/Nm³
NOX ≤ 30 mg/Nm³
CO ≤ 50 mg/Nm³
CF4 ≤ 70 mg/Nm³
HF ≤ 1 mg/Nm³
NH3 ≤ 2 mg/Nm³
Comprising
Direct fired thermal oxidizer
Hot gas cooling and acid recovery
Alkaline wet scrubber
Honeycomb selective catalytic reduction deNOx system
>1M cost spare parts
Direct fired thermal oxidizer
Including 2x natural gas combustion chambers and burners
- High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation
- Gaseous waste streams injected via nozzles downstream and close to the burner
- 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h
- 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer
- 2 seconds minimum residence time in combustion chamber at 1400C
- 1,800mm combustion chamber internal dia.
- Approx 300mm refractory lining
- 2,400mm combustion chamber external dia.
- 12,000mm combustion chamber internal length
- 3.28MW maximum thermal capacity
- 4,900Nm3/h, 60mbar, 14kW combustion air fans
One chamber is active, the other one is on standby and can be prepared, repaired, or maintained.
This allows minimizing shutdown and changeover time to only several days
Wet scrubber hot gas cooling and acid recovery
SGL Carbon Diabon HT-PQ 850 graphite pipe quencher
- 6,000 Nm3/h capacity flow
- 1,100 mm dia.
- 2,000mm high
- pumps
SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger
- 1,100mm dia.
- 4,500mm tube length
- 595 no. tubes
- 22mm tube internal dia.
- Graphite, carbon steel
- pumps
Quench vessel
- PP/FRP
- 1,100mm dia.
- Approx. 6,000mm high
2x Scrubber absorber columns, each
- Shell FRP/PP
- Internals PP
- 1,000mm dia.
- 11,000mm high
- Pumps
- Dosing station
FRP 5m3 Emergency water tank
- 1,600mm dia.
- 3,000mm high
- 3kW heating
2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019)
Honeycomb selective catalytic reduction deNOx system
- 5,900Nm3/h, 130mbar, 42kW induced draft fan
- 320 kW gas/gas heat exchanger
- 500 kW capacity reheat burner
- 1.2m deNOx honeycomb catalyst
Clean gas outflow
Stack with flow & temperature measurement
Spare parts include
- 200 items of sensors, pumps, valves, gaskets, joints etc.
- Graphite quencher
- Falling film absorber
With the redesign and maintenance support of Dürr, the system could also
- be adapted to other halogenated gases with bricks to be selected according to gas application
- cope with the presence of VOCs or contaminated air
- larger volumes with the addition of a small lance for 15kg/h liquid injection
Perguntas e respostas
Tem alguma dúvida ou deseja agendar uma consulta?
Inspeção
Items offered for sale are sold “as is / where is” subject to sale terms and conditions. Most items are used and may contain defects. Bidders may inspect the property prior to bidding. Inspection is by appointment only. Please use the 'Ask your question' feature to schedule an appointment for Inspection.
Pagamento
Payment instructions: Payments must be made by bank transfer unless otherwise stated. To obtain payment information, log into your account and select 'My Bids'. Please follow the checkout procedure. Payment in full is due no later than five (5) business days from the time and date of the close of the auction.
Retirada
Items may be removed by appointment only. All items must be removed within the removal period stated on the event page. The Buyer is responsible for all arrangements and work related to the removal of the assets unless otherwise stated and must adhere to the site-specific health and safety requirements. LSI or any of its group of companies does not act as shipper or exporter of record without its express consent.For EU located assets, non-EU buyers need to engage a customs broker /freight forwarder if exporting assets outside of the EU.For UK located assets, non-UK buyers need to engage a customs broker /freight forwarder if exporting assets outside of the UK.If asset is located outside of UK or EU, bidders should adapt clause above accordingly.
Opções de retirada e transporte
Descubra transportadoras nacionais imbatíveis de nossos melhores remetentes. Explore nossa lista selecionada de fornecedores terceirizados de remessa com qualificação para revolucionar sua experiência de envio.
Instruções especiais
Please note: If you are the winning bidder and default on your purchase in any way, your account may be locked, and you will be unable to bid on future sales. Please familiarise yourself with the event’s specific terms & conditions.
Informações adicionais
É a primeira vez que você dá um lance? Leia nossos Termos e condições.
Para receber mais assistência, consulte nossos Perguntas frequentes.